Handling and Storage:
Apply only as intended. Though this product is non-toxic and nonhazardous, it is not suitable for human consumption. The manufacturer assumes no liability, expressed or implied, in the use of this product.
Store this product out of direct sunlight in a cool (under 38° C) dry area. For best results, use within 24 months. Request a LWT1000 MSDS for more specific information.
Made in the USA.
Application Recommendations:
--Hatchery Tanks: Apply at the rate of 1.0 ppm of total water volume. Mix measured dose with clean water at a ratio of at least 1:100. Broadcast or apply diluted mixture to culture tank or biofilter tank. Apply at least once at every stage of larval development, or every 3- 5 days as necessary or until values are achieved. Maintain constant aeration and monitor oxygen levels carefully within 24 hours of application.
-- II. Grow-out Operations*: Apply to pond at the rate of 0.1 ppm 1-3 times weekly. Mix dosage in a 200L drum full of water and broadcast around the pond. * Maintain constant aeration and monitor oxygen levels carefully within 24 hours of application.
-- III. Pond Soil: Apply 60ML / m3 on soil OR COMPOST for first application and blend thoroughly. Repeat when water is introduced into the pond. In lined ponds, only one dosage of 0.1 ppm is required after filling with water during pond preparation.
Special Instructions - Aquaculture • Dosages based on a one hectare pond one meter deep need to be adjusted accordingly.